These L-brackets are mounted at the inner corner where two vertical sections meet, and they connect the sections at a 90° Angle. Brackets are less obvious than externally mounted connectors on the profile.

The 4-hole inner corner bracket with a single support is an external, die-cast fastening method. Each side of the bracket has two holes stacked on top of the other, while a single brace provides extra strength. Slotted mounting holes allow greater adjustability between connecting profiles. A bracket with slot tabs on the bracket helps align the profile with the bracket and prevents rotation. It does not require machining services and can provide unlimited positioning along the section T-slot.

Dimensions of die cast bracket

Matching Profiles
	Normal	Strengh	Double
PG20	√	×	×
PG30	√	√	√
PG40	√	√	√
PG45	√	√	√
Slot 10 – PG40	√	√	√
Slot 10 – PG45	√	√	×
Notice: Compatible fastening sets being offered for all dimensions of extruded brackets connector.

Parameters

Matching Profiles	Description	Section	Unit Weight (g)	Part No.
PG20	20×20, Normal		4.00	20.2.02.020020.01
PG30	30×30, Normal		16.00	30.2.02.030030.01
	30×60, Strengh		49.00	30.2.02.030060.01
	60×60, Double		101.00	30.2.02.060060.01
PG40	40×40, Normal		35.00	40.2.02.040040.01
	40×80, Strengh		109.00	40.2.02.040080.01
	80×80, Double		252.00	40.2.02.080080.01
PG45	45×45, Normal		50.00	45.2.02.045045.01
	45×90, Strengh		158.00	45.2.02.045090.01
	90×90, Double		385.00	45.2.02.090090.01
Slot 10 – PG45	45×45, Normal		72.00	00.2.02.045045.01
	45×90, Strengh		190.00	00.2.02.045090.01
Slot 10 – PG40	40×40, Normal		50.00	00.2.02.040040.01
	40×80, Strengh		125.00	00.2.02.040080.01
	80×80, Double		260.00	00.2.02.080080.01

Application

Die casting brackets are commonly used in L connection and T connection of profile frames.

It could be fastened to profiles faces with bolts, washers and nuts.